Hi,
while working on android remote control software, i purchased a Irtrans Ethernet (without DB) last week, as Ethernet/IR Gateway for my android app (very basic by now). Installation and configuration was done, then i started to learn IR commands from different remotes into the IRServer's REM files.
Figuring out how to get the irtrans send out codes via ethernet, i tested the UDP interface (21000) and also the TCP interface (21000) both with the following result: the only working method is the Send- CCF command (sndccf resp. Asndccf). Sndhex and Asndhex result in "ERROR: Not supported without IR Database" (what i have to accept so far). Then i packet-sniff'd the communication between IRServer and the IRTrans while sending some IR codes, and tried to replace the last part of the udp packet with data from the REM File, resulting in the irtrans sending nothing on ir, Error Messages etc. i try to check in the evening.
So i am stuck with CCF Codes by now. I found a CCF Code File for a Sony CD Player i have here, extracted some ccf codes with CCFExtractor, and they work with "sndccf"/UDP , also with "Asndccf"/TCP, nice. Now i am loking for a way to convert *learned* ir codes from the IRserver DB to CCF and this is where i am stuck for now, as an example i have a rather old Grundig Amplifier here, for which i cannot find a ready-made ccf file.
Somebody knows of a way to extract CCF Codes from IRServer's learned remote controls ?
Does somebody know why the irtrans ethernet without DB does not support sndhex / Asndhex Commands ? They should not be far more complex for the irtrans to compute then the sndccf commands i think.
Thanks in advance,
wolfgang